英语翻译PLATING:SPRING CONTACT PLATING TO BE TESTED ON A LOT BASIS PER 069-7497BLOCKER:NO BLOCKER ALLOWEDUNDER PLATING:1.2 UM NICKEL MINIMUM,ALL OVEROVER PLATING:0.8 UM GOLD MINIMUM,ON END OF SPRING CONTACTOVER PLATING:3-5 UM TIN,LOCAL TO PADCONT

来源：学生作业帮助网 编辑：作业帮 时间：2024/04/29 11:48:19
英语翻译PLATING:SPRING CONTACT PLATING TO BE TESTED ON A LOT BASIS PER 069-7497BLOCKER:NO BLOCKER ALLOWEDUNDER PLATING:1.2 UM NICKEL MINIMUM,ALL OVEROVER PLATING:0.8 UM GOLD MINIMUM,ON END OF SPRING CONTACTOVER PLATING:3-5 UM TIN,LOCAL TO PADCONT

英语翻译PLATING:SPRING CONTACT PLATING TO BE TESTED ON A LOT BASIS PER 069-7497BLOCKER:NO BLOCKER ALLOWEDUNDER PLATING:1.2 UM NICKEL MINIMUM,ALL OVEROVER PLATING:0.8 UM GOLD MINIMUM,ON END OF SPRING CONTACTOVER PLATING:3-5 UM TIN,LOCAL TO PADCONT
英语翻译
PLATING:SPRING CONTACT PLATING TO BE TESTED ON A LOT BASIS PER 069-7497
BLOCKER:NO BLOCKER ALLOWED
UNDER PLATING:1.2 UM NICKEL MINIMUM,ALL OVER
OVER PLATING:0.8 UM GOLD MINIMUM,ON END OF SPRING CONTACT
OVER PLATING:3-5 UM TIN,LOCAL TO PAD
CONTACT RESISTANCE:0.10 OHMS MAX

英语翻译PLATING:SPRING CONTACT PLATING TO BE TESTED ON A LOT BASIS PER 069-7497BLOCKER:NO BLOCKER ALLOWEDUNDER PLATING:1.2 UM NICKEL MINIMUM,ALL OVEROVER PLATING:0.8 UM GOLD MINIMUM,ON END OF SPRING CONTACTOVER PLATING:3-5 UM TIN,LOCAL TO PADCONT
PLATING:SPRING CONTACT PLATING TO BE TESTED ON A LOT BASIS PER 069-7497
电镀：根据069-7497对弹簧接触镀层进行基本测试.
BLOCKER:NO BLOCKER ALLOWED
挡块：不允许有挡块
UNDER PLATING:1.2 UM NICKEL MINIMUM,ALL OVER
底层电镀：最小镀镍厚度1.2微米,全镀
OVER PLATING:0.8 UM GOLD MINIMUM,ON END OF SPRING CONTACT
外层电镀：在弹簧接触端,最小镀金厚度0.8微米.
OVER PLATING:3-5 UM TIN,LOCAL TO PAD
外层电镀：垫板局部,镀锡厚度3-5微米
CONTACT RESISTANCE:0.10 OHMS MAX
接触电阻：最大0.10欧姆

电镀：春季接触电镀进行了很多的基础上每069-7497
不允许阻滞剂阻滞剂
在镀1.2微米镍最低，全
在镀0.8微米金最低，在春季结束接触
在电镀：3 - 5微米的锡，地方垫
接触电阻0.10欧姆最大这个回答像是在线翻译过来的。。读上去不顺，而且不准确哦 ，那我在翻译下，等我啊，我先回答的啊 ...

全部展开

电镀：春季接触电镀进行了很多的基础上每069-7497
不允许阻滞剂阻滞剂
在镀1.2微米镍最低，全
在镀0.8微米金最低，在春季结束接触
在电镀：3 - 5微米的锡，地方垫
接触电阻0.10欧姆最大

收起

英语翻译PLATING:SPRING CONTACT PLATING TO BE TESTED ON A LOT BASIS PER 069-7497BLOCKER:NO BLOCKER ALLOWEDUNDER PLATING:1.2 UM NICKEL MINIMUM,ALL OVEROVER PLATING:0.8 UM GOLD MINIMUM,ON END OF SPRING CONTACTOVER PLATING:3-5 UM TIN,LOCAL TO PADCONT 英语翻译NOTES:OD-PLATING MF Zn 5-C ACC.TO SES 2211a ID-PLATING MF Zn 5-C ACC.TO SES 2211a PLATING COLOR-YELLOW-ADMISSIBLE DEFORMATION:TBD mm UNDER TBD N-PART FREE OF BURRS & SHARP EDGES under-plating 英语翻译2.FINISH:CONTACT:30u'' AU PLATING ON CONTACT AREA100u MIN.TIN PLATING ON SOLDERTAILS50u MIN.NICKEL UNDERPLATING OVER ALLSHELL:100u MIN.NICKEL UNDERPLATING OVER ALL 英语翻译spring festival AMP端子 Plating A 、Plating B、Plating 有什么区别? electroless plating是什么意思 A3C Zinc plating chrome plating是什么意思 from plating是什么意思 90/10 TIN plating Chrome Plating是什么意思? 24K GOLD Plating 英语翻译PLATING NI HARDWARE PIECE 这是 铜 的意思,具体什么铜知道的朋友告诉我, Spring spring Spring 英语翻译Spring Festival's the time for...